Lenovo AVerMedia M135 PCI TV Tuner Driver

The Lenovo AVerMedia M135 PCI TV Tuner driver helps Windows recognize the tuner card and makes its functions available to compatible TV-viewing or capture software. Although listed in the Audio category, this device is a TV tuner, so the correct driver is important for both device detection and associated audio handling. Before downloading for Windows 11, 10, 8, or 7, check that the package explicitly supports your Windows version and system architecture.

Key Features

• Hardware recognition: Allows Windows to identify the installed Lenovo AVerMedia M135 PCI TV Tuner and communicate with it through the appropriate device interface.
• TV software integration: Provides the driver-level connection that compatible applications need to access supported tuner functions. Separate viewing or recording software may be required.
• Associated audio support: Helps compatible applications access the tuner’s audio functions when the hardware, signal source, and software are configured correctly.
• Device management: Enables you to check driver status in Device Manager and troubleshoot detection or configuration issues.

How to Install

1. Confirm your hardware and Windows version. Open Device Manager and locate the tuner or an unidentified multimedia device. If needed, check its Hardware IDs under Properties > Details to verify that the driver matches. Also confirm whether Windows is 32-bit or 64-bit.

1. Choose a compatible driver package. Review the package’s supported hardware and operating systems before downloading. Do not assume that a driver intended for Windows 7 or 8 will work on Windows 10 or 11; compatibility must be confirmed for the specific release.

1. Prepare the downloaded files. Extract the archive if necessary and close any TV-viewing or capture applications. Creating a restore point before changing an existing driver can make recovery easier if problems arise.

1. Install the driver. Run the included setup program and follow its prompts. If no installer is provided, right-click the tuner in Device Manager, select Update driver > Browse my computer for drivers, and choose the extracted driver folder.

1. Restart and test the tuner. Reboot if prompted, then check Device Manager for warning icons. Open your compatible TV application, select the tuner and correct signal source, and test reception and sound. Channel availability depends on your input signal and the tuner’s supported broadcast standards.