The Epson WorkForce WF 7520 driver lets Windows communicate with your printer, helping it process print jobs and apply the settings you choose. When setting up the device on Windows 11, 10, 8, or 7, select a driver package that matches your operating system and system architecture.

Key Features

• Print settings access: Adjust paper size, orientation, print quality, and other supported options from your Windows applications.
• Wide-format printing controls: Configure jobs for the WF 7520’s larger paper formats, with paper settings suited to documents, spreadsheets, and layouts.
• Two-sided printing options: Access supported duplex settings to reduce paper use when printing longer documents.
• Connection support: Enable printing over a compatible USB or network connection. Scanning requires the appropriate Epson scanning software, which may be supplied separately from the printer driver.

How to Install

1. Check your Windows version. Open your PC’s system information to confirm whether you use Windows 11, 10, 8, or 7 and whether the system is 32-bit or 64-bit. Choose the corresponding Epson WorkForce WF 7520 package, checking its compatibility notes before downloading.

1. Prepare the printer. Turn it on, load paper, and make sure no error messages appear on its display. For a network installation, connect the printer and computer to the same local network. If using USB, wait to connect the cable until the installer requests it.

1. Run the downloaded installer. Open the setup file and approve the Windows permission prompt if it appears. Follow the instructions to accept the license terms and select the components you need.

1. Choose your connection method. Select USB or network setup, then follow the prompts to locate the printer. Complete the installation and restart Windows if requested.

1. Verify the setup. Find the Epson printer in Windows printer settings and print a test page. If you also need to scan, install compatible Epson scanning software and test that function separately.

If the printer is not detected, check the cable or network connection before repeating setup. For missing paper or duplex options, confirm that Windows is using the Epson driver rather than a generic printer driver.

Common Issues and Fixes

• Install fails or stalls: Disconnect the WF-7520, remove previous Epson WF-7520/WorkForce entries in Programs and Features, reboot, then run the downloaded driver as administrator. Temporarily disable antivirus if it blocks the Epson installer.
• Device not detected: For USB, use a direct rear port and a known-good cable, not a hub. For network, print a network status sheet, confirm the WF-7520 and PC are on the same subnet, and enter the printer’s IP address during setup instead of relying on auto-discovery.
• Version conflicts or scanning errors: Uninstall older Epson Scan and Epson printer drivers before installing the latest package. If printing works but scanning does not, reinstall the full Epson driver/scan package and restart the PC.