Epson RX560 RX580 RX590 Driver

The Epson RX560 RX580 RX590 driver helps Windows communicate with your Epson multifunction printer so applications can send print jobs and access supported device settings. Before downloading, confirm that the package matches your exact model and Windows version, since printing, scanning, and connection support can vary between packages.

Key Features

• Windows printing integration: Allows compatible software to send documents and photos to the printer through the Windows print system.
• Print setup controls: Provides access to supported options such as paper size, media type, print quality, and page layout.
• Device status information: Depending on the package, Epson utilities may show ink levels, report printing errors, and offer maintenance tools.
• Model-specific configuration: Helps Windows use the appropriate capabilities for your RX560, RX580, or RX590. Scanning may require a separate Epson scanner driver or utility.

How to Install

1. Check your model and system. Read the model label on the printer and confirm whether your PC runs Windows 11, 10, 8, or 7. Check the system architecture as well, and choose a package explicitly compatible with that configuration.

1. Download the appropriate driver. Select the Epson RX560 RX580 RX590 package that lists your model and operating system. If your version of Windows is not listed in the package details, verify compatibility before proceeding.

1. Prepare the printer. Turn it on, load paper, and clear any displayed errors. For a USB installation, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt, and follow the setup instructions. Choose the connection method that matches your actual setup. A “Network” download category does not necessarily mean the printer has built-in networking; a shared printer or print server may require additional configuration.

1. Test the installation. Restart Windows if prompted, then open the printer settings and print a test page. If you also need scanning, install the compatible scanner software and test it separately.

For the best results, avoid selecting a driver solely because its model number looks similar. Matching both the printer and Windows version helps prevent missing settings, setup failures, and communication problems.

Common Issues and Fixes

• Install fails or stops midway: Disconnect the RX560/RX580/RX590 USB cable, remove any older Epson RX driver, run the installer as administrator, and reconnect only when setup prompts. Temporarily disable third-party antivirus if it blocks installation.
• Printer not detected: Use a direct USB port instead of a hub, try a known-good cable, power the printer on, and restart the Print Spooler service. Check Device Manager for USB errors.
• Version conflicts or wrong driver: Uninstall previous Epson RX and generic Windows drivers, restart, then install the package matching your exact model—RX560, RX580, or RX590. Avoid mixing drivers from different RX models.