The EPSON L5190 Series driver helps Windows communicate with your Epson multifunction printer over a network. It allows your computer to send print jobs and use the settings supported by the installed driver, making it easier to work with the printer from a connected PC.

Key Features

• Network printing support: Enables printing to an EPSON L5190 Series connected to your local network, provided the printer and computer can communicate.
• Print settings control: Gives you access to options such as paper size, media type, orientation, and print quality, depending on the driver package.
• Windows compatibility: Driver options are available for Windows 11, 10, 8, and 7. Choose the package that matches your Windows version and system architecture.
• Printer status information: Compatible Epson software can display useful information, such as connection problems or print errors, to help with basic troubleshooting.

How to Install

1. Check your Windows version. Open your computer’s system information and confirm the operating system and whether it is 32-bit or 64-bit. Select an EPSON L5190 Series driver package that explicitly supports your configuration.

1. Prepare the network connection. Turn on the printer and connect it to your router using its supported wired or wireless network setup. Make sure your PC is on the same local network; guest-network restrictions may prevent printer discovery.

1. Download and launch the installer. Save the appropriate driver package, open it, and approve the Windows permission prompt if requested. Follow the on-screen instructions to begin installation.

1. Select the network printer. Choose the network connection option when offered, then select your Epson printer from the detected devices. If it is not listed, check its network connection or use its IP address if the installer provides that option.

1. Finish and test. Complete the setup, restart Windows if prompted, and print a test page from the printer’s Windows settings. If you also need scanning, check whether the downloaded package includes scanner support; a separate Epson scanning driver or utility may be required.

For an existing installation, confirm that you are updating the correct printer entry, especially if Windows lists both USB and network versions. This helps avoid sending documents to an inactive connection.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable until the installer asks for it, close other Epson software, and run the L5190 driver package as administrator. If it still fails, uninstall older Epson printer/scanner entries, restart Windows, then reinstall.
• Printer not detected: Use a direct USB 2.0 port (no hub), confirm the L5190 is powered on, and reseat the cable. For Wi-Fi, reconnect the printer to the same 2.4 GHz network as the PC and rerun Epson’s network setup.
• Version conflicts/duplicate devices: Remove existing L5190 or generic Epson entries in Settings > Devices, clear the print queue, restart the Print Spooler service, and install only the latest Epson package.